Pass Fortinet NSE6_WCS-7.0 exam Dumps 100 Pass Guarantee With Latest Demo
The NSE6_WCS-7.0 PDF Dumps Greatest for the Fortinet Exam Study Guide!
NEW QUESTION # 20
Refer to the exhibit.
A customer is using the AWS Elastic Load Balancer.
Which two statements are correct about the Elastic LoadBalancer configuration? (Choose two.)
- A. The load balancer is configuredfor the internal traffic oftheVPC
- B. The DNS name is used to access devices.
- C. The load balancer is configured to load balance traffic between devices in two AZS.
- D. The Amazon resource name is used to access the load balancer node and targets.
Answer: B,C
NEW QUESTION # 21
An administrator has deployed an environment in AWS and is now trying to send outbound traffic from the web servers to the internet through FortiGate. The FortiGate policies are configured to allow all outbound traffic. however. the traffic is not reaching the FortiGate internal interface.
Which two statements Can be the reasons for this behavior? (Choose two)
- A. FortiGate is not configured as a default gateway tor web servers.
- B. AWS security groups are blocking the traffic.
- C. AWS source destination checks are enabled on the FortiGate internal interfaces.
- D. Internet Gateway (IGW) is not configured for VPC.
Answer: B,C
NEW QUESTION # 22
Which three statements are correct about Amazon Web Services networking? (Choose three.)
- A. You cannot use custom frames in AWS
- B. You cannot configure gratuitous ARP but you can configure proxy ARP.
- C. You can use unicast the FGCP protocol
- D. You can configure instant IP failover in AWS.
- E. You cannot deploy FortiGate in transparent mode in AWS.
Answer: A,C,E
NEW QUESTION # 23
An MSSP deployed 16 FortiGate VMS With the default AWS security groups and network access lists using an on-demand license from Amazon Web Services (AWS) Marketplace. They are using a third- party configuration backup application to back up and track changes for the FortiGate configurations. It can connect to the FortiGatedevices using only the SSH protocol, A customer is using the correct username and password configured on the FortiGate devices. but they are unable to log in using the SSH protocol.
What can be the reason Why this authentication is failing?
- A. The default AWS network access list for FortiGate does not allow SSH.
- B. The default AWS Security group for FortiGate does not allow SSH.
- C. The AWS key is required to log in to FortiGate using SSH
- D. AWS uses non-standard SSH port1025, and the default AWS security groups and NACL for FortiGate are not configured for the port.
Answer: C
NEW QUESTION # 24
Refer to the exhibit.
An administrator configured two auto-scaling polices that they now want to test.
What Will be the impact on payg-auto-scaling-group for the FortiGate devices if the administrator executes a scale-in policy?
- A. The scale-in policy will decrease instances from two to one.
- B. The scale-in policy will decrease the desired capacity from two to one
- C. The scale-in policy will decrease the number of maximum instances from four to three.
Answer: C
NEW QUESTION # 25
You want to deploy the Fortinet HA cloud formation template to stage and bootstrap the FortiGate configuration in the same that you created your VPC, Which is Ohio US-East-2.
Based on this information, which statement is correct?
- A. The Fortinet HA cloud formation template automatically creates an S3 bucket.
- B. You must create an S3 bucket to stage and bootstrap FortiGate with an FGCP unicast configuration in any region.
- C. You must create an S3 bucket to stage and bootstrap FortiGate with an FGCP multicast configuration in the Ohio US-East-2 region.
- D. You must create an S3 bucket to stage and bootstrap FortiGate with an FGCP unicast configuration in the Ohio US-East-2 region.
Answer: A
NEW QUESTION # 26
Refer to the exhibit.
Which two statements are true about inbound traffic based on the IGW ingress route table and GWLB deployment shown in the exhibit? (Choose two.)
- A. GWLB encapsulates traffic with the GENEVE protocol and sends it to FortiGate.
- B. Inbound traffic is directed to the application subnet through a GWLB endpoint.
- C. Inbound traffic is directed to the GWLB through a GWLB endpoint.
- D. GWLB forwards traffic to FortiGate without encapsulation in its dedicated subnet.
Answer: A,C
Explanation:
* Traffic Direction through GWLB Endpoint:
* The ingress route table directs inbound traffic to the GWLB through a GWLB endpoint (GWLBe). This endpoint is responsible for directing traffic to the Gateway Load Balancer for further processing (Option B).
* GENEVE Encapsulation:
* The GWLB encapsulates the inbound traffic using the GENEVE protocol. This encapsulated traffic is then sent to FortiGate instances for security inspection. The use of GENEVE ensures that the original traffic context is preserved and can be analyzed by FortiGate (Option D).
* Other Options Analysis:
* Option A is incorrect because GWLB does not forward traffic without encapsulation in its dedicated subnet.
* Option C is incorrect as the inbound traffic is directed to the GWLB endpoint first, not directly to the application subnet.
References:
* AWS Gateway Load Balancer Documentation: AWS GWLB
* GENEVE Protocol Overview: GENEVE Protocol
NEW QUESTION # 27
An administrator must deploy a web application firewall (WAF) solution to protect the web applications of their organization.
Why would the administrator choose FortiWeb Cloud over AWS WAF with Fortinet managed rules?
- A. Traffic must be inspected for malware.
- B. WAF signatures must be manually updated by FortiGuard.
- C. SSL inspection is a requirement.
- D. The solution must meet PCI 6.6 compliance.
Answer: C
Explanation:
* SSL Inspection Requirement:
* FortiWeb Cloud provides comprehensive SSL inspection capabilities, allowing it to decrypt and inspect HTTPS traffic for threats. This is a crucial feature for many organizations that need to ensure all traffic, including encrypted traffic, is thoroughly inspected (Option C).
* Comparison with AWS WAF:
* While AWS WAF with Fortinet managed rules provides robust protection, it might not offer the same level of SSL inspection capabilities as FortiWeb Cloud.
* Other Considerations:
* Option A (Manual WAF signature updates) is incorrect because FortiWeb Cloud updates signatures automatically.
* Option B (PCI 6.6 compliance) is a general requirement for any WAF solution, not specific to choosing FortiWeb Cloud over AWS WAF.
* Option D (Traffic inspection for malware) is a feature provided by both FortiWeb Cloud and AWS WAF with Fortinet managed rules.
References:
* FortiWeb Cloud Overview: FortiWeb Cloud
* AWS WAF Documentation: AWS WAF
NEW QUESTION # 28
What is the purpose of the created as part Of a FortiGate autoscale deployment using Fortinet cloud formation template in AWS?
- A. To store the firewall policies used by all FortiGates_
- B. To Store the information used for the scale set.
- C. To store information about varying states of auto scaling conditions.
- D. To store the traffic logs Of all FortiGates.
Answer: C
NEW QUESTION # 29
An administrator needs to attach an Elastic Network Interface (ENI) to an application instance in a VPC with multiple availability zones. An instance runs in availability zone 1.
Which ENI property must the administrator consider when implementing this requirement?
- A. You can detach the primary ENI from an AWS instance.
- B. An ENI cannot attach to an instance in availability zone 2.
- C. When you move an ENI, network traffic remains directed to the old instance until you terminate that instance.
- D. After the ENI detaches from one instance, it can reattach only to the same instance.
Answer: B
Explanation:
* ENI Attachment Across Availability Zones:
* Elastic Network Interfaces (ENIs) are associated with a specific Availability Zone. They cannot be attached to instances that are in a different Availability Zone than where the ENI was created.
Therefore, an ENI created in Availability Zone 1 cannot be attached to an instance in Availability Zone 2 (Option A).
* ENI Reattachment:
* ENIs can be detached from one instance and reattached to another instance within the same Availability Zone. This flexibility allows for network interface configuration to be preserved across instance changes within the same AZ.
* Other Options Analysis:
* Option B is incorrect because an ENI can be reattached to any instance in the same AZ.
* Option C is incorrect as the primary ENI (eth0) cannot be detached from an instance.
* Option D is incorrect because when an ENI is moved, the traffic is directed to the new instance, and there is no redirection to the old instance.
References:
* AWS ENI Documentation: Elastic Network Interfaces
* AWS Networking Best Practices: AWS Networking
NEW QUESTION # 30
As part of the security plan you have been tasked with deploying a FortiGate in AWS.
Which two are the security responsibility of the customer in a cloud environment? (Choose two.)
- A. Traffic encryption
- B. User management
- C. Virtualization platform
- D. Storage infrastructure
Answer: A,B
NEW QUESTION # 31
Refer to the exhibit.
An administrator configured a FortiGate device to connect to me AWS API to retrieve resource values from the AWS console to create dynamic objects for the FortiGatepolicies. The administrator is unable to retrieve AWS dynamic objects on FortiGate.
Which three reasons can explain btw? (Choose three.)
- A. The AWS Lab SON connector is configured with an invalid AWS access or secret key
- B. The AWS Lab SON connector failed to retrieve the instance list.
- C. AWS was not able to validate credentials provided by the AWS Lab SON connector.
- D. The AWS Lab SON connector failed to connect on port 401.
- E. The AWS API call is not supported on XML version I . O.
Answer: A,B,C
NEW QUESTION # 32
Which statement is true about an Elastic Network Interface (ENI)?
- A. When youmove an ENI, network traffic is not redirected to the new instance.
- B. Once ENI detaches from one instance. it cannot reattach to another instance.
- C. You can detach primary ENI from an AWS instance.
- D. An ENI cannot move between AZs.
Answer: D
NEW QUESTION # 33
Refer to the exhibit.
Which statement is correct about the VPC peering connections shown in the exhibit?
- A. You can associate VPC ID pcx-23232323 with VPC B to form a VPC peering connection between VPC B and VPC C.
- B. You cannot route packets directly from VPC B to VPC C through VPC A.
- C. You cannot create a separate VPC peering connection between VPC B and VPC C to route packets directly.
- D. To route packets directly from VPC B to VPC C through VPC A, you must add a route for network
192.168.0.0/16 in the VPC A routing table.
Answer: B
Explanation:
* Understanding VPC Peering:
* VPC peering connections allow instances in one VPC to communicate with instances in another VPC. Peering is a one-to-one relationship between two VPCs.
* Transit Routing Limitation:
* AWS VPC peering connections do not support transitive peering. This means that a packet originating in VPC B cannot be routed through VPC A to reach VPC C. Each pair of VPCs must have its own peering connection.
* Routing Table Configuration:
* Even if you add a route in the VPC A routing table for the 192.168.0.0/16 network, it won't allow VPC B to communicate with VPC C because of the non-transitive nature of VPC peering.
* Comparison with Other Options:
* Option A is incorrect because adding a route in VPC A does not overcome the limitation of non- transitive peering.
* Option C is incorrect because associating pcx-23232323 with VPC B is not how VPC peering works.
* Option D is incorrect because you can create a separate peering connection between VPC B and VPC C, which is the required approach for communication between these VPCs.
References:
* AWS VPC Peering Guide: VPC Peering
* Limitations of VPC Peering: AWS VPC Peering Limitations
NEW QUESTION # 34
Which three statements correctly describe FortiGate Cloud-Native Firewall (CNF)? (Choose three.)
- A. It scales seamlessly.
- B. It provides carrier-grade protection.
- C. It uses AWS Elastic Load Balancing (ELB).
- D. It is considered to be a Firewall-as-a-Service (FWaaS).
- E. It can be managed by FortiManager and AWS firewall manager.
Answer: A,D,E
Explanation:
* Scalability:
* FortiGate Cloud-Native Firewall (CNF) is designed to scale seamlessly with your cloud infrastructure, providing the necessary protection without requiring manual intervention for scaling (Option B).
* Firewall-as-a-Service:
* FortiGate CNF is offered as a Firewall-as-a-Service (FWaaS), which simplifies the deployment and management of firewall capabilities directly in the cloud environment (Option D).
* Management:
* FortiGate CNF can be managed using FortiManager and AWS Firewall Manager, providing comprehensive management capabilities both from Fortinet's platform and AWS's native management tools (Option E).
* Other Considerations:
* Option A (carrier-grade protection) is not specifically highlighted as a feature of FortiGate CNF.
* Option C (uses AWS Elastic Load Balancing) is incorrect as FortiGate CNF operates independently of AWS ELB, although it can integrate with various AWS services.
References:
* FortiGate CNF Documentation: FortiGate CNF
* AWS Firewall Manager: AWS Firewall Manager
NEW QUESTION # 35
Your company deployed a FortiSandbox for AWS.
Which statement is correct about FortiSandbox for AWS?
- A. FortiSandbox for AWS comes as a hybrid solution. The FortiSandbox manager is installed on-premises and analyzes the results of the sandboxing process received from AWS EC2 instances.
- B. FortiSandbox for AWS does not need more resources because it performs only management and analysis tasks.
- C. The FortiSandbox manager is installed on the AWS platform and analyzes the results of the sandboxing process received from on-premises Windows instances.
- D. FortiSandbox deploys new EC2 instances with the custom Windows and Linux VMs, then it sends malware, runs it, and captures the results for analysis.
Answer: D
Explanation:
* FortiSandbox Deployment:
* FortiSandbox for AWS deploys new EC2 instances to create isolated environments where it can safely execute and analyze suspicious files. These instances run custom Windows and Linux virtual machines specifically configured for sandboxing (Option D).
* Sandboxing Process:
* The process involves sending potential malware to these isolated VMs, executing it, and monitoring its behavior to detect malicious activities. The results are then captured and analyzed to provide detailed threat intelligence.
* Other Options Analysis:
* Option A is incorrect because FortiSandbox for AWS operates entirely within the AWS environment and does not require an on-premises manager.
* Option B is incorrect as the FortiSandbox manager is not installed on the AWS platform for managing on-premises instances.
* Option C is incorrect because FortiSandbox requires sufficient resources to perform the actual sandboxing and analysis tasks.
References:
* FortiSandbox for AWS Documentation: FortiSandbox
* Sandboxing Concepts: Sandboxing
NEW QUESTION # 36
Your company deployed a FortiSandb0X for AWS.
Which statement is correct about FortiSandbox for AWS?
- A. FortiSandbox for AWS comes as hybrid solution. The FortiSandb0X manager is installed on-premises and analyzes the results Of the sandboxing process received from AWS EC2 instances
- B. FortiSandbox for AWS does not need more resources because it performs only management and analysis tasks.
- C. The FortiSandbox manager is installed on AWS platform and analyzes the results of the sandboxing process received from on-premises Windows instances.
- D. FortiSandbox deploys new EC2 instances with the custom Windows and Linux VMS, then it sends malware, runs it, and captures the results for analysis.
Answer: B
NEW QUESTION # 37
Which two statements are correct about AWS Network Access Control Lists (NACLS)? (Choose two.)
- A. By default. each custom NACL allows all inbound and outbound traffic unless you add new rules,
- B. NACLs are stateless: responses to allowed inbound traffic are subject to the rules for outbound traffic.
- C. An NACL has separate inbound and outbound rules, and each rule can either allow or deny traffic.
- D. VPC automatically comes with a modifiable default NACL, and by default it denies all inbound and outbound IPv4 traffic.
Answer: B,C
NEW QUESTION # 38
Refer to the exhibit.
You deployed an active-passive FortiGate HA using a Cloud Formation template on an existing VPC_Now you want to test active-passive FortiGate HA failover by running a debug so you can see the API calls to change the elastic and secondary IP addresses.
Which statement is correct about the output of the debug?
- A. The elastic IP is associated with port2 of Fgt2. and the secondary IP address for port1and port2 was updated successfully.
- B. The routing table for Fgt2 updated successfully. and port2 will provide internet access to Fgt2.
- C. The elastic IP is associated with port1of Fgt2.
- D. IP address 10. O. O. L 3 is now associated with eni-Ob61d8afcOaefb8a2.
Answer: D
NEW QUESTION # 39
......
Read Online NSE6_WCS-7.0 Test Practice Test Questions Exam Dumps: https://buildazure.actualvce.com/Fortinet/NSE6_WCS-7.0-valid-vce-dumps.html