NSE8_812 Dumps PDF 2025 Program Your Preparation EXAM SUCCESS [Q49-Q74]

NSE8_812 Dumps PDF 2025 Program Your Preparation EXAM SUCCESS

Get Perfect Results with Premium NSE8_812 Dumps Updated 107 Questions

Fortinet NSE8_812 certification is the highest level of certification offered by Fortinet, and it is designed to recognize individuals who have achieved the highest level of expertise in Fortinet products and technologies. Fortinet NSE 8 - Written Exam (NSE8_812) certification exam covers a wide range of topics, including network security architecture, advanced threat protection, network security operations, and cloud security. NSE8_812 exam is designed to test the candidate's knowledge and skills in these areas, as well as their ability to apply them to real-world scenarios.

In terms of exam structure, the Fortinet NSE8_812 exam is a written test. Candidates will answer 60 multiple-choice questions within 2.5 hours. NSE8_812 exam is available in English, Japanese, and Simplified Chinese. The minimum passing score for NSE8_812 exam is 50%. Candidates who pass NSE8_812 exam will achieve the Fortinet Network Security Expert (NSE) 8 certification.

NEW QUESTION # 49
You want to use the MTA adapter feature on FortiSandbox in an HA-Cluster. Which statement about this solution is true?

A. The configuration is different than on a standalone device.
B. The configuration of the MTA Adapter Local Interface is different than on port1.
C. The MTA adapter mode is only detection mode.
D. The MTA adapter is only available in the primary node.

Answer: D

Explanation:
The MTA adapter feature on FortiSandbox is a feature that allows FortiSandbox to act as a mail transfer agent (MTA) that can receive, inspect, and forward email messages from external sources. The MTA adapter feature can be used to integrate FortiSandbox with third-party email security solutions that do not support direct integration with FortiSandbox, such as Microsoft Exchange Server or Cisco Email Security Appliance (ESA). The MTA adapter feature can also be used to enhance email security by adding an additional layer of inspection and filtering before delivering email messages to the final destination. The MTA adapter feature can be enabled on FortiSandbox in an HA-Cluster, which is a configuration that allows two FortiSandbox units to synchronize their settings and data and provide high availability and load balancing for sandboxing services. However, one statement about this solution that is true is that the MTA adapter is only available in the primary node. This means that only one FortiSandbox unit in the HA-Cluster can act as an MTA and receive email messages from external sources, while the other unit acts as a backup node that can take over the MTA role if the primary node fails or loses connectivity. This also means that only one IP address or FQDN can be used to configure the external sources to send email messages to the FortiSandbox MTA, which is the IP address or FQDN of the primary node. References: https://docs.fortinet.com/document/fortisandbox
/3.2.0/administration-guide/19662/mail-transfer-agent-mtahttps://docs.fortinet.com/document/fortisandbox/3.
2.0/administration-guide/19662/high-availability-ha
https://docs.fortinet.com/document/fortisandbox/4.4.3/administration-guide/877925/mta-adapter

NEW QUESTION # 50
Refer to the exhibit.

FortiManager is configured with the Jinja Script under CLI Templates shown in the exhibit.
Which two statements correctly describe the expected behavior when running this template? (Choose two.)

A. The administrator must first manually map the interface for each device with a meta field.
B. The template will work if you change the variable format to $(WAN).
C. The Jinja template will automatically map the interface with "WAN" role on the managed FortiGate.
D. The template will work if you change the variable format to {{ WAN }}.
E. The template will fail because this configuration can only be applied with a CLI or TCL script.

Answer: A,D

Explanation:
The Jinja template will not automatically map the interface with "WAN" role on the managed FortiGate. The administrator must first manually map the interface for each device with a meta field.
The template will work if you change the variable format to {{ WAN }}. The {{ }} syntax is used to define a variable in a Jinja template.

NEW QUESTION # 51
Refer to the exhibits.
The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?

A. Use local-id
B. Use peer-id
C. Change advpn2 to IKEv1
D. Use network-overlay id

Answer: D

Explanation:
A is correct because using network-overlay id allows you to configure multiple ADVPN tunnels on a single interface with a single IP address on the DC FortiGate. This is explained in the FortiGate Administration Guide under ADVPN > Configuring ADVPN > Configuring ADVPN on the hub. Reference: https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpn https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpn/978794/configuring-advpn

NEW QUESTION # 52
Refer to The exhibit, which shows a topology diagram.

A customer wants to use SD-WAN for traffic generated from the data center towards Branches. SD-WAN on HUB should follow the underlay condition on each Branch and the solution should be scalable for hundreds of Branches.
Which SD WAN-Rules strategy should be used?

A. Auto based on link quality
B. Manual based on route-tags
C. Lowest Cost SLA
D. Best Quality based on route-tags

Answer: D

NEW QUESTION # 53
Refer to the exhibit, which shows the high availability configuration for the FortiAuthenticator (FAC1).

Based on this information, which statement is true about the next FortiAuthenticator (FAC2) member that will join an HA cluster with this FortiAuthenticator (FAC1)?

A. The FortiToken license will need to be installed on the FAC2.
B. FSSO sessions from FAC1 will be synchronized to FAC2.
C. FAC2 can have its HA interface on a different network than FAC1.
D. FAC2 can only process requests when FAC1 fails.

Answer: B

Explanation:
When FortiAuthenticator operates in cluster mode, it provides active-passive failover and synchronization of all configuration and data, including FSSO sessions, between the cluster members. Therefore, if FAC1 is the active unit and FAC2 is the standby unit, any FSSO sessions from FAC1 will be synchronized to FAC2. If FAC1 fails, FAC2 will take over the active role and continue to process the FSSO sessions. References: https://docs.fortinet.com/document/fortiauthenticator/6.1.2/administration-guide/122076/high-availability

NEW QUESTION # 54
Refer to the CLI output:

Given the information shown in the output, which two statements are correct? (Choose two.)

A. Attackers can be blocked before they target the servers behind the FortiWeb.
B. An IP address that was previously used by an attacker will always be blocked
C. Geographical IP policies are enabled and evaluated after local techniques.
D. The IP Reputation feature has been manually updated
E. Reputation from blacklisted IP addresses from DHCP or PPPoE pools can be restored

Answer: A,E

Explanation:
The CLI output shown in the exhibit indicates that FortiWeb has enabled IP Reputation feature with local techniques enabled and geographical IP policies enabled after local techniques (set geoip-policy-order after-local). IP Reputation feature is a feature that allows FortiWeb to block or allow traffic based on the reputation score of IP addresses, which reflects their past malicious activities or behaviors. Local techniques are methods that FortiWeb uses to dynamically update its own blacklist based on its own detection of attacks or violations from IP addresses (such as signature matches, rate limiting, etc.). Geographical IP policies are rules that FortiWeb uses to block or allow traffic based on the geographical location of IP addresses (such as country, region, city, etc.). Therefore, based on the output, one correct statement is that attackers can be blocked before they target the servers behind the FortiWeb. This is because FortiWeb can use IP Reputation feature to block traffic from IP addresses that have a low reputation score or belong to a blacklisted location, which prevents them from reaching the servers and launching attacks. Another correct statement is that reputation from blacklisted IP addresses from DHCP or PPPoE pools can be restored. This is because FortiWeb can use local techniques to remove IP addresses from its own blacklist if they stop sending malicious traffic for a certain period of time (set local-techniques-expire-time), which allows them to regain their reputation and access the servers. This is useful for IP addresses that are dynamically assigned by DHCP or PPPoE and may change frequently. References: https://docs.fortinet.com/document/fortiweb/6.4.0/administration-guide/19662/ip-reputation https://docs.fortinet.com/document/fortiweb/6.4.0/administration-guide/19662/geographical-ip-policies

NEW QUESTION # 55
Refer to the exhibit showing the history logs from a FortiMail device.

Which FortiMail email security feature can an administrator enable to treat these emails as spam?

A. Sender domain validation in a session profile
B. Soft fail SPF validation in an antispam profile
C. Impersonation analysis in an antispam profile
D. DKIM validation in a session profile

Answer: C

Explanation:
Impersonation analysis is a feature that detects emails that attempt to impersonate a trusted sender, such as a company executive or a well-known brand, by using spoofed or look-alike email addresses. This feature can help prevent phishing and business email compromise (BEC) attacks. Impersonation analysis can be enabled in an antispam profile and applied to a firewall policy. References:https://docs.fortinet.com/document/fortimail
/6.4.0/administration-guide/103663/impersonation-analysis
https://docs.fortinet.com/document/fortimail/7.2.0/cookbook/221814/protecting-against-email-impersonation- in-fortimail

NEW QUESTION # 56
You are responsible for recommending an adapter type for NICs on a FortiGate VM that will run on an ESXi Hypervisor. Your recommendation must consider performance as the main concern, cost is not a factor.
Which adapter type for the NICs will you recommend?

A. Native ESXi Networking with E1000
B. Virtual Function (VF) PCI Passthrough
C. Physical Function (PF) PCI Passthrough
D. Native ESXi Networking with VMXNET3

Answer: C

Explanation:
The FortiGate VM is a virtual firewall appliance that can run on various hypervisors, such as ESXi, Hyper-V, KVM, etc. The adapter type for NICs on a FortiGate VM determines the performance and compatibility of the network interface cards with the hypervisor and the physical network. There are different adapter types available for NICs on a FortiGate VM, such as E1000, VMXNET3, SR-IOV, etc. If performance is the main concern and cost is not a factor, one option is to use native ESXi networking with VMXNET3 adapter type for NICs on a FortiGate VM that will run on an ESXi hypervisor. VMXNET3 is a paravirtualized network interface card that is optimized for performance in virtual machines and supports features such as multiqueue support, Receive Side Scaling (RSS), Large Receive Offload (LRO), IPv6 offloads, and MSI/MSI-X interrupt delivery. Native ESXi networking means that the FortiGate VM uses the standard virtual switch (vSwitch) or distributed virtual switch (dvSwitch) provided by the ESXi hypervisor to connect to the physical network.
This option can provide high performance and compatibility for NICs on a FortiGate VM without requiring additional hardware or software components. References: https://docs.fortinet.com/document/fortigate/7.0.0
/vm-installation-for-vmware-esxi/19662/installing-fortigate-vm-on-vmware-esxihttps://docs.fortinet.com
/document/fortigate/7.0.0/vm-installation-for-vmware-esxi/19662/networking

NEW QUESTION # 57
Refer to the exhibit that shows VPN debugging output.

The VPN tunnel between headquarters and the branch office is not being established.
What is causing the problem?

A. HQ is using IKE v1 and the branch office is using with IKE v2.
B. There is a mismatch in the ISAKMP SA lifetime.
C. The Phase-1 encryption algorithms are not matching.
D. There is no matching Diffie-Hellman Group.

Answer: C

NEW QUESTION # 58
A remote worker requests access to an SSH server inside the network. You deployed a ZTNA Rule to their FortiClient. You need to follow the security requirements to inspect this traffic.
Which two statements are true regarding the requirements? (Choose two.)

A. FortiGate can perform SSH access proxy host-key validation.
B. Traffic is discarded as ZTNA does not support SSH connection rules
C. SSH traffic is tunneled between the client and the access proxy over HTTPS
D. You need to configure a FortiClient SSL-VPN tunnel to inspect the SSH traffic.

Answer: A,C

Explanation:
ZTNA supports SSH connection rules that allow remote workers to access SSH servers inside the network through an HTTPS tunnel between the client and the access proxy (FortiGate). The access proxy acts as an SSH client to connect to the real SSH server on behalf of the user, and performs host-key validation to verify the identity of the server. The user can use any SSH client that supports HTTPS proxy settings, such as PuTTY or OpenSSH. References:https://docs.fortinet.com/document/fortigate/7.0.0/ztna-deployment/899992
/configuring-ztna-rules-to-control-access
https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/29927/ztna-ssh-access-proxy-example

NEW QUESTION # 59
Refer to the exhibit.

You have been tasked with replacing the managed switch Forti Switch 2 shown in the topology.
Which two actions are correct regarding the replacement process? (Choose two.)

A. CLAG-ICL needs to be manually reconfigured once the new switch is connected to the FortiGate
B. MCLAG-ICL will be automatically reconfigured once the new switch is connected to the FortiGate.
C. After replacing the FortiSwitch unit, the automatically created trunk name changes.
D. After replacing the FortiSwitch unit, the automatically created trunk name does not change

Answer: A,D

Explanation:
* A is correct because the automatically created trunk name is based on the MAC address of the FortiSwitch unit. When the FortiSwitch unit is replaced, the MAC address will change, but the trunk name will not change.
* B is correct because CLAG-ICL is a manually configured link aggregation group. When the FortiSwitch unit is replaced, the CLAG-ICL configuration will need to be manually reconfigured on the new FortiSwitch unit.
The other options are incorrect. Option C is incorrect because the automatically created trunk name does not change when the FortiSwitch unit is replaced. Option D is incorrect because MCLAG-ICL is a manually configured link aggregation group and will not be automatically reconfigured when the FortiSwitch unit is replaced.
References:
* Configuring link aggregation on FortiSwitches | FortiSwitch / FortiOS 7.0.4 - Fortinet Document Library
* Managing FortiLink | FortiGate / FortiOS 7.0.4 - Fortinet Document Library
https://docs.fortinet.com/document/fortiswitch/7.0.8/devices-managed-by-fortios/173284/replacing-a- managed-fortiswitch-unit

NEW QUESTION # 60
Refer to The exhibit showing a FortiEDR configuration.

Based on the exhibit, which statement is correct?

A. If a malicious file is executed and attempts to establish a connection it will generate duplicate events.
B. FortiEDR Collector will not collect OS Metadata.
C. If an unresolved file rule is triggered, by default the file is logged but not blocked.
D. The presence of a cryptolocker malware at rest on the filesystem will be detected by the Ransomware Prevention security policy.

Answer: C

NEW QUESTION # 61
Refer to the CLI configuration of an SSL inspection profile from a FortiGate device configured to protect a web server:

Based on the information shown, what is the expected behavior when an HTTP/2 request comes in?

A. FortiGate will forward the traffic without modifying the ALPN header.
B. FortiGate will reject all HTTP/2 ALPN headers.
C. FortiGate will strip the ALPN header and forward the traffic.
D. FortiGate will rewrite the ALPN header to request HTTP/1.

Answer: C

Explanation:
https://docs.fortinet.com/document/fortigate/7.0.0/new-features/710924/http-2-support-in-proxy-mode-ssl- inspection

NEW QUESTION # 62
Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration. Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

Answer: B

Explanation:
The VPN configuration shown in Exhibit C is a baseline VPN configuration that uses IKEv2 with pre-shared keys and AES256 encryption for both IKE and ESP phases. However, this configuration does not match the output shown in Exhibit A and B, which indicate that IKEv1 is used with RSA signatures and AES128 encryption for both IKE and ESP phases. Therefore, to restore VPN connectivity, the configuration needs to be modified to match these parameters. Option B shows the correct configuration that matches these parameters. Option A is incorrect because it still uses IKEv2 instead of IKEv1. Option C is incorrect because it still uses pre-shared keys instead of RSA signatures. Option D is incorrect because it still uses AES256 encryption instead of AES128 encryption. Reference: https://docs.fortinet.com/document/fortigate/7.0.0/cookbook/19662/ipsec-vpn-with-forticlient

NEW QUESTION # 63
Refer to the exhibit showing a firewall policy configuration.

To prevent unauthorized access of their cloud assets, an administrator wants to enforce authentication on firewall policy ID 1.
What change does the administrator need to make?

Answer: D

Explanation:
The firewall policy in the exhibit allows all traffic from the internal network to the cloud. To enforce authentication on this traffic, the administrator needs to add the auth-on-demand option to the policy. This option will force all users to authenticate before they are allowed to access the cloud.
The following is the correct configuration:
config firewall policy
edit 1
set srcintf "internal"
set dstintf "wan1"
set srcaddr "all"
set dstaddr "all"
set service "all"
set action accept
set auth-on-demand enable
References:
Configuring firewall authentication | FortiGate / FortiOS 7.4.0 - Fortinet Document Library Firewall policy configuration | FortiGate / FortiOS 7.4.0 - Fortinet Document Library

NEW QUESTION # 64
Refer to the exhibits, which show a firewall policy configuration and a network topology.

An administrator has configured an inbound SSL inspection profile on a FortiGate device (FG-1) that is protecting a data center hosting multiple web pages-Given the scenario shown in the exhibits, which certificate will FortiGate use to handle requests to xyz.com?

A. FortiGate will use the Fortinet_CA_Untrusted certificate for the untrusted connection,
B. FortiGate will reject the connection since no certificate is defined.
C. FortiGate will use the first certificate in the server-cert list-the abc.com certificate
D. FortiGate will fall-back to the default Fortinet_CA_SSL certificate.

Answer: C

Explanation:
https://docs.fortinet.com/document/fortigate/7.4.1/administration-guide/850344/define-multiple-certificates-in- an-ssl-profile-in-replace-mode If there is no matched server certificate in the list, then the first server certificate in the list is used as a replacement.

NEW QUESTION # 65
An automation stitch was configured using an incoming webhook as the trigger named 'my_incoming_webhook'. The action is configured to execute the CLI Script shown:

Answer: D

Explanation:
The CLI script in option A will send the log message to the webhook server. The webhook server can then be configured to take any desired action, such as storing the log message in a database or sending an email notification.
The other options are incorrect. Option B will not send the log message to the webhook server because it does not contain the curl command. Option C will send the log message to the webhook server, but it will also include the FortiGate's IP address and MAC address. This information is not necessary, and it could be used by an attacker to identify the FortiGate. Option D will not send the log message to the webhook server because it does not contain the webhook action.
References:
Automation webhook stitches: https://docs.fortinet.com/document/fortigate/7.4.0/administration-guide/989735/webhook-action Webhooks: https://en.wikipedia.org/wiki/Webhook

NEW QUESTION # 66
Refer to the exhibit, which shows a FortiGate configuration snippet.

A customer in Costa Rica has a FortiGate with SD-WAN configured to use a VPN connection to the United States to browse the internet using a public IP from that country. They would like to enable the SD-WAN rule using a webhook.
Which configuration must be added to the FortiGate, and which type of HTTP request must be used to accomplish this? (Choose two.)

Answer: A,B

NEW QUESTION # 67
Which two statements about bounce address tagging and verification (BATV) on FortiMail are true? (Choose two.)

A. You must publish the BATV public key as a DNS TXT record.
B. FortiMail will insert the BATV tag to the sender address in the envelope.
C. Emails with an empty sender address will be subjected to bounce verification.
D. BATV will use symmetric keys to verify the bounce address tag.

Answer: B,C

NEW QUESTION # 68
A customer's cybersecurity department needs to implement security for the traffic between two VPCs in AWS, but these belong to different departments within the company. The company uses a single region for all their VPCs.
Which two actions will achieve this requirement while keeping separate management of each department's VPC? (Choose two.)

A. Create a transit VPC with a FortiGate HA cluster, connect to the other two using VPC peering, and use routing tables to force traffic through the FortiGate cluster.
B. Create a VPC with a FortiGate auto-scaling group with a Transit Gateway attached to the three VPC to force routing through the FortiGate cluster
C. Migrate all the instances to the same VPC and create 1AM accounts for each department, then implement a new subnet for a FortiGate auto-scaling group and use routing tables to force the traffic through the FortiGate cluster.
D. Create an 1AM account for the cybersecurity department to manage both existing VPC, create a FortiGate HA Cluster on each VPC and IPSEC VPN to force traffic between the VPCs through the FortiGate clusters

Answer: A,B

Explanation:
To implement security for the traffic between two VPCs in AWS, while keeping separate management of each department's VPC, two possible actions are:
* Create a transit VPC with a FortiGate HA cluster, connect to the other two using VPC peering, and use routing tables to force traffic through the FortiGate cluster. This option allows the cybersecurity department to manage the transit VPC and apply security policies on the FortiGate cluster, while the other departments can manage their own VPCs and instances. The VPC peering connections enable direct communication between the VPCs without using public IPs or gateways. The routing tables can be configured to direct all inter-VPC traffic to the transit VPC.
* Create a VPC with a FortiGate auto-scaling group with a Transit Gateway attached to the three VPCs to force routing through the FortiGate cluster. This option also allows the cybersecurity department to manage the security VPC and apply security policies on the FortiGate cluster, while the other departments can manage their own VPCs and instances. The Transit Gateway acts as a network hub that connects multiple VPCs and on-premises networks. The routing tables can be configured to direct all inter-VPC traffic to the security VPC. References: https://docs.fortinet.com/document/fortigate-public- cloud/7.2.0/aws-administration-guide/506140/connecting-a-local-fortigate-to-an-aws-vpc-vpn
https://docs.fortinet.com/document/fortigate-public-cloud/7.0.0/sd-wan-architecture-for-enterprise
/166334/sd-wan-configuration

NEW QUESTION # 69
Refer to the exhibit.

You are operating an internal network with multiple OSPF routers on the same LAN segment. FGT_3 needs to be added to the OSPF network and has the configuration shown in the exhibit. FGT_3 is not establishing any OSPF connection.
What needs to be changed to the configuration to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election?

Answer: D

Explanation:
The OSPF configuration shown in the exhibit is using the default priority value of 1 for the interface port1.
This means that FGT_3 will participate in the DR/BDR election process with the other OSPF routers on the same LAN segment. However, this is not desirable because FGT_3 is a new device that needs to be added to the OSPF network without affecting the existing DR/BDR election. Therefore, to make sure FGT_3 will establish OSPF neighbors without affecting the DR/BDR election, the priority value of the interface port1 should be changed to 0. This will prevent FGT_3 from becoming a DR or BDR and allow it to form OSPF adjacencies with the current DR and BDR. Option B shows the correct configuration that changes the priority value to 0. Option A is incorrect because it does not change the priority value. Option C is incorrect because it changes the network type to point-to-point, which is not suitable for a LAN segment with multiple OSPF routers. Option D is incorrect because it changes the area ID to 0.0.0.1, which does not match the area ID of the other OSPF routers on the same LAN segment. References:https://docs.fortinet.com/document/fortigate/7.
0.0/administration-guide/358640/basic-ospf-example

NEW QUESTION # 70
Refer to the exhibits.

A FortiGate cluster (CL-1) protects a data center hosting multiple web applications. A pair of FortiADC devices are already configured for SSL decryption (FAD-1), and re-encryption (FAD-2). CL-1 must accept unencrypted traffic from FAD-1, perform application detection on the plain-text traffic, and forward the inspected traffic to FAD-2.
The SSL-Offload-App-Detect application list and SSL-Offload protocol options profile are applied to the firewall policy handling the web application traffic on CL-1.
Given this scenario, which two configuration tasks must the administrator perform on CL-1? (Choose two.)

Answer: A,D

Explanation:
To enable application detection on plain-text traffic that has been decrypted by FortiADC, the administrator must perform two configuration tasks on CL-1:
* Enable SSL offloading in the firewall policy and select the SSL-Offload protocol options profile.
* Enable application control in the firewall policy and select the SSL-Offload-App-Detect application list.
References: https://docs.fortinet.com/document/fortigate/6.4.0/cookbook/103438/application-detection- on-ssl-offloaded-traffic

NEW QUESTION # 71
Refer to the exhibit.

A customer wants FortiClient EMS configured to deploy to 1500 endpoints. The deployment will be integrated with FortiOS and there is an Active Directory server.
Given the configuration shown in the exhibit, which two statements about the installation are correct? (Choose two.)

A. The Windows clients only require "File and Printer Sharing0 allowed and the rest is handled by Active Directory group policy
B. If no client update time is specified on EMS, the user will be able to choose the time of installation if they wish to delay.
C. You can only deploy initial installations to Windows clients.
D. You must use Standard or Enterprise SQL Server rather than the included SQL Server Express
E. A client can be eligible for multiple enabled configurations on the EMS server, and one will be chosen based on first priority

Answer: A,B

Explanation:
A is correct because if no client update time is specified on EMS, the user will be able to choose the time of installation if they wish to delay. This is because the FortiClient EMS server will not force the installation on the client.
E is correct because the Windows clients only require "File and Printer Sharing" allowed and the rest is handled by Active Directory group policy. This is because the Active Directory group policy will configure the Windows clients to automatically install FortiClient and the FortiClient EMS server will only need to push the initial configuration to the clients.
The other options are incorrect. Option B is incorrect because a client can only be eligible for one enabled configuration on the EMS server. Option C is incorrect because you can deploy initial installations to both Windows and macOS clients. Option D is incorrect because you can use the included SQL Server Express to deploy FortiClient EMS.
References:
Deploying FortiClient EMS | FortiClient / FortiOS 7.4.0 - Fortinet Document Library Configuring FortiClient EMS | FortiClient / FortiOS 7.4.0 - Fortinet Document Library FortiClient EMS installation requirements | FortiClient / FortiOS 7.4.0 - Fortinet Document Library

NEW QUESTION # 72
You are troubleshooting a FortiMail Cloud service integrated with Office 365 where outgoing emails are not reaching the recipients' mail What are two possible reasons for this problem? (Choose two.)

A. A Mail Flow connector from the Exchange Admin Center has not been set properly to the FortiMail Cloud FQDN.
B. The FortiMail access control rule to relay from Office 365 servers FQDN is missing.
C. The FortiMail DKIM key was not set using the Auto Generation option.
D. The FortiMail access control rules to relay from Office 365 servers public IPs are missing.

Answer: A,B

Explanation:
a) The FortiMail access control rule to relay from Office 365 servers FQDN is missing.
If the access control rule to relay from Office 365 servers FQDN is missing, then FortiMail will not be able to send emails to Office 365. This is because the access control rule specifies which IP addresses or domains are allowed to relay emails through FortiMail.
b) A Mail Flow connector from the Exchange Admin Center has not been set properly to the FortiMail Cloud FQDN.
If the Mail Flow connector from the Exchange Admin Center is not set properly to the FortiMail Cloud FQDN, then Office 365 will not be able to send emails to FortiMail. This is because the Mail Flow connector specifies which SMTP server is used to send emails to external recipients.

NEW QUESTION # 73
Review the following FortiGate-6000 configuration excerpt:

Based on the configuration, which statement is correct regarding SNAT source port partitioning behavior?

A. It equally distributes SNAT source ports across chassis slots.
B. It is the default SNAT configuration and preserves active sessions when an FPC or FPM goes down.
C. It dynamically distributes SNAT source ports to operating FPCs or FPMs.
D. It statically distributes SNAT source ports to operating FPCs or FPMs

Answer: D

Explanation:
Based on the configuration, the statement that is correct regarding SNAT source port partitioning behavior is that it statically distributes SNAT source ports to operating FPCs or FPMs. This is because the nat-source-port option is set to chassis-slots, which means that the FortiGate-6000 will allocate SNAT source ports to all FPCs or FPMs that are enabled when the command is entered. If an FPC or FPM is disabled from the CLI, the SNAT source ports assigned to that FPC or FPM will not be re-allocated to the remaining FPCs or FPMs. This option preserves active sessions when an FPC or FPM goes down, but does not dynamically re-distribute SNAT source ports if an FPC or FPM is powered off. Reference: https://docs.fortinet.com/document/fortigate/7.2.5/fortigate-6000-administration-guide/81276/controlling-snat-port-partitioning-behavior

NEW QUESTION # 74
......

Fortinet NSE8_812 exam covers a wide range of topics related to network security, including advanced routing and switching, network security design, advanced threat protection, and secure wireless access. NSE8_812 exam is designed to test the candidates' ability to apply their knowledge and skills in solving complex problems and making critical decisions in real-world scenarios.

NSE8_812 PDF Dumps Extremely Quick Way Of Preparation: https://buildazure.actualvce.com/Fortinet/NSE8_812-valid-vce-dumps.html

Fortinet NSE8_812 Certification Practice Exam

NSE8_812 Dumps PDF 2025 Program Your Preparation EXAM SUCCESS [Q49-Q74]

Related Articles