[Jan-2024 Newly Released] Pass 350-601 Exam - Real Questions and Answers
Pass 350-601 Review Guide, Reliable 350-601 Test Engine
NEW QUESTION # 82
Refer to the exhibit.
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches becomes isolated. What is wrong with the implementation?
- A. Different zone set names must be configured on both MDS switches.
- B. E Ports on both MDS switches must be configured as F ports for the zoning to function.
- C. Zones must have the same name on both MDS switches for the E ports to function.
- D. Zones are local to the MDS switch and name service must be used to activate the connection between E ports.
Answer: C
NEW QUESTION # 83
A network engineer must configure FCoE on an interface of a Cisco MDS 9000 Series Switch. It should be used for mapping between VLAN 600 and VSAN 6. Drag and drop the commands from the bottom into their implementation order in the FCoE configuration. Not all commands are used.
Answer:
Explanation:
Explanation
Graphical user interface, text Description automatically generated
NEW QUESTION # 84 
Refer to the exhibit. A secure server that provides services to EPG-2 must be placed in EPG-1. The remaining EPGs-EPG-2, EPG-3. and EPG-4-must communicate without any contracts. Which set of actions accomplishes this goal?
- A. Option C
- B. Option D
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 85
A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic. Which configuration should be applied after the physical connection is established?
- A. UCS-A# scope server 1
UCS-A /server# scope cimc
UCS-A /server/cimc # scope mgmt-conn sideband
UCS-A /server/cimc # mgmt-conn-state enabled
UCS-A /server/cimc/mgmt-conn* # commit-buffer - B. UCS-A# scope server 1
UCS-A /server# scope cimc
UCS-A /server/cimc # scope mgmt-conn sideband
UCS-A /server/cimc/mgmt-conn #set mgmt-conn-state enabled
UCS-A /server/cimc/mgmt-conn* # commit-buffer - C. UCS-A# scope chassis 1
UCS-A /chassis# scope cimc
UCS-A /chassis /cimc # set mgmt-conn-state enabled
UCS-A /chassis /cimc/mgmt-conn* # commit-buffer - D. UCS-A# scope chassis 1
UCS-A /chassis# scope cimc
UCS-A /chassis/cimc # scope mgmt-conn sideband
UCS-A /chassis/cimc/mgmt-conn # mgmt-conn-state enabled
UCS-A /chassis/cimc/mgmt-conn* # commit-buffer
Answer: B
Explanation:
Section: Compute
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm3-1/b_C-Series- Integration_UCSM3-1/b_C-Series-Integration_UCSM3-1_chapter_010.html
NEW QUESTION # 86
An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco MDS 9000 Series Switch.
Which action enables fabric redundancy?
- A. Configure the NPV devices to use an external FLOGI database.
- B. Add a port channel to upstream switches.
- C. Use TE ports to connect to upstream switches.
- D. Connect the NPV devices to multiple upstream switches.
Answer: B
NEW QUESTION # 87
An engineer configures a role for a new user in Cisco UCS Manager The role should allow the user to configure vHBAs, vNICs, and server port types. Which role should be assigned to allow the engineer to complete this task?
- A. AAA administrator
- B. network administrator
- C. server-compute
- D. operations
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-4/UCSM_GUI_Configurat
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucsm_privileges/3-1/UCSM-Privileges-3_1.pdf
NEW QUESTION # 88
Refer to the exhibit.
Which backup operation type does not include the Preserve Identities feature?
- A. system configuration
- B. full state
- C. logical configuration
- D. all configuration
Answer: C
NEW QUESTION # 89
Where is the witness deployed in a two-node Cisco HyperFlex Edge deployment?
- A. to the HyperFlex Edge two-node cluster
- B. to Cisco Intersight
- C. to an additional server with network access to HyperFlex Edge
- D. to a third-party cloud provider
Answer: B
Explanation:
The Cisco HyperFlex Edge invisible cloud witness is only required for 2-node HX Edge deployments.
correct, it has to connect to Intersight as it is a CLOUD invisible witness as per the document shared:
The Cisco HyperFlexEdge invisiblecloud witnessis only requiredfor 2-nodeHX Edge deployments. The witness does not require any additional infrastructure, setup, configuration, backup, patching ,or management of any kind. This feature is automatically configured as part of a 2-node Hyper Flex Edge installation. Outbound access at the remote site must be present for connectivity to Intersight (eitherIntersight.com or to the Intersight Virtual Appliance). HyperFlexEdge 2-nodeclusters cannot operate without this connectivity in place
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ Edge_Deployment_Guide/b_HyperFlex_Edge_Deployment_Guide_4_0.pdf
NEW QUESTION # 90
Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.
Answer:
Explanation:
NEW QUESTION # 91
What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?
- A. Increased compression efficiency
- B. offline encryption acceleration
- C. GPU acceleration
- D. increased network throughput
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ Installation_VMWare_ESXi/3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5/ b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5_chapter_01100.html#:~:text=Overview%
20of%20HyperFlex%20Hardware%20Acceleration%20Cards,-This%20chapter%20provides&text=These%
20cards%20provide%20improved%20performance%20and%20compression%20efficiency%20for%20most
%20storage%20workloads.
NEW QUESTION # 92
Refer to the exhibit.
A network engineer must configure port E1/31- 32 to forward only storage server traffic of VLAN 200 on Cisco fabric interconnects A and B. Port E1/31- 32 is not reserved for any other traffic. Which port type must be configured to accomplish this goal?
- A. uplink
- B. FCoE storage
- C. FCoE uplink
- D. unified uplink
Answer: A
NEW QUESTION # 93
Refer to the exhibit.
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches becomes isolated. What is wrong with the implementation?
- A. Different zone set names must be configured on both MDS switches.
- B. E Ports on both MDS switches must be configured as F ports for the zoning to function.
- C. Zones must have the same name on both MDS switches for the E ports to function.
- D. Zones are local to the MDS switch and name service must be used to activate the connection between E ports.
Answer: C
Explanation:
Explanation
When two switches in a fabric are merged using a TE or E port, these TE and E ports may become isolated when the active zone set databases are different between the two switches or fabrics."
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/fabric/nxos/nx
NEW QUESTION # 94
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.
Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: D
NEW QUESTION # 95
An engineer is implementing security on the Cisco MDS 9000 switch. Drag drop the descriptions from the left onto the correct security features on the right.
Answer:
Explanation:
Explanation
prevent unauthorized - fabric binding.
Uses the exchange fabric membership- fabric binding
Can be distributed - port security
Allows a preconfigured - port security
NEW QUESTION # 96
A network engineer is adding a Cisco HyperFlex data platform to the Cisco intersight management portal. Which two components are required for Intersight to claim the Cisco HyperFlex data platform? (Choose two.)
- A. device public IP address
- B. device serial number
- C. device FQDN
- D. device ID
- E. device claim code
Answer: D,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/ HyperFlex_Installation_Guide_for_Intersight/b_HyperFlex_Installation_Guide_for_Intersight/ b_HyperFlex_Installation_Guide_for_Intersight_chapter_011.html
https://www.cisco.com/c/en/us/support/docs/hyperconverged-infrastructure/hyperflex-hx-dataplatform/
214268-cisco-intersight-hyperflex-installatio.html
NEW QUESTION # 97
Refer to the exhibit.
Which setting must be configured to prevent reuse of passwords?
- A. Change Count
- B. No Change Interval
- C. History Count
- D. Change Interval
Answer: C
NEW QUESTION # 98
Refer to Exhibit:
An engineer must use the python module in the guest shell of the Cisco Nexus 9000 Series switch to shutdown port Ethernet 1/4 Which command set will accomplish this?
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: D
NEW QUESTION # 99
Refer to the exhibit.
What is the result of implementing this configuration?
- A. The Fibre Channel interface is configured for SPAN.
- B. The Fibre Channel interface is configured for FSPF.
- C. The Fibre Channel interface is configuration for source distribution.
- D. The Fibre Channel interface is configured for synchronization distribution.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/san_switching/421_n1_1/ b_Cisco_n5k_nxos_sanswitching_config_guide_rel421_n1_1/Cisco_n5k_nxos_sanswitching_config_guide_rel421_n1_1_chapter3.html
https://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_1/ Cisco_Nexus_5000_Series_Switch_CLI_Software_Configuration_Guide_chapter50.html
NEW QUESTION # 100
What occurs when running the command install deactivate <filename> while a software maintenance upgrade is performed on a Cisco Nexus 9000 Series switch?
- A. The current set of packages is committed.
- B. The current upgrade stops.
- C. The package is removed from the switch.
- D. The package features for the line card are disabled.
Answer: D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_smu.html#task_B8B0F5BA80BE41AEA93197F560665648
NEW QUESTION # 101
Cisco Nexus 9000 Series Switches are configured with LACP protocol and default aging timers. What is the impact on the LACP peer during an ISSU upgrade?
- A. The LACP peer renegotiates the adjacency.
- B. The LACP peer session remains up.
- C. The LACP peer connection resets.
- D. The LACP peer connection terminates.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/interfaces/configuration/guide/b_C ISSU and ungraceful switchovers are not supported with LACP fast timers.
NEW QUESTION # 102
......
100% Free 350-601 Daily Practice Exam With 455 Questions: https://buildazure.actualvce.com/Cisco/350-601-valid-vce-dumps.html