Get 2024 Free Cisco 300-815 Exam Practice Materials Collection
Get Latest and 100% Accurate 300-815 Exam Questions
NEW QUESTION # 69
An engineer is configuring a call park feature in Cisco Unified Communications Manager Express. Which command does the engineer use to ensure that the call is reverted to the user after 60 seconds?
- A. R2(config-ephone-dn)#park reservation-group 1
- B. R2(config-ephone-dn)#park-slot timeout 60 limit 2 recall alternate 3002
- C. R2(config-ephone-dn)#park reservation-group 60
- D. R2(config-ephone-dn)#park-slot timeout 30 limit 2 recall alternate 3002
Answer: D
NEW QUESTION # 70
CollabCorp is a global company with two clusters, emea.collab corp and apac.collab.corp. URI dialing is implemented and working in each cluster. The company configured routing between clusters to make inter-cluster calls via URI. but this is not working as expected. Which two configuration elements should be checked to resolve this issue? (Choose two.)
- A. intercluster trunk
- B. SIP route pattern
- C. calling search space and partition
- D. SIP trunk
- E. directory URI partition
Answer: B,D
NEW QUESTION # 71
Refer to the exhibit.
A user reports that when they call a specific phone number, no one answers the call, but when they call from a mobile phone, the call is answered. The engineer troubleshooting the issue is expecting the far-end gateway to cut through audio on the 183 Session Progress SIP message. Which SIP Profile configuration element is necessary for the Cisco Unified Communications Manager to send acknowledgement of provisional responses?
- A. Accept Audio Codec Preferences in Received Offer must be set to On.
- B. On the SIP Profile, the configuration parameter SIP Rel1XX Options must be set to Send PRACK for all 1xx Messages.
- C. Allow Passthrough of Configured Line Device Caller Information must be enabled.
- D. Early Offer for G Clear Calls must be enabled.
Answer: B
NEW QUESTION # 72
Refer to the exhibit.
Within the North American Numbering Plan, gateways located in Ottawa, Canada and marked as "YOW" are assigned to the Calling Party Transformation CSS NANP_CgPTP, which contains partition NANP_calling_xforms. What is the calling-party number and the numbering type if the calling user
+1613-555-1234 dials the number?
- A. calling number 011-1-613-555-1234 and numbering type "subscriber"
- B. calling number 613-555-1234 and numbering type "subscriber"
- C. calling number 011613-555-1234 and numbering type "international"
- D. calling number 613-555-1234 and numbering type "national"
Answer: D
NEW QUESTION # 73
Which action is correct with respect to toll fraud prevention configuration in the Cisco Unified Communications Manager Express?
- A. Enable Secondary Dial tone on Analog and Digital FXO Ports.
- B. Configure IP Address Trusted Authentication for Incoming VoIP Calls.
- C. Configure Direct Inward Dial for Incoming ISDN Calls with overlap dialing.
- D. Configure the command no ip address trusted authenticate under "voice service voip".
Answer: B
Explanation:
Section: CME/SRST Gateway Technologies
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/ cmeadm/cmetoll.html#concept_ECC4F4E7ED0F45C594B703EEF34762F2
NEW QUESTION # 74
Refer to the exhibit.
An engineer configures Cisco Unified Border Element to connect the enterprise VoIP network with a SIP telephony provider. Calls are not working in either direction. What must be configured in the dial peer 1 to fix the issue?
- A. codec g729
- B. incoming called number 555.......
- C. answer-address 555 ........
- D. session-protocol sipv2
Answer: D
NEW QUESTION # 75
A user in location X dials an extension at location
Y. The call travels through a QoS-enabled WAN network, but the user experiences choppy or clipped audio. What is the cause of this issue?
- A. missing Call Admission Control
- B. codec mismatch
- C. phone class of service issue
- D. ptime mismatch
Answer: B
Explanation:
Section: Cisco Unified Border Element
NEW QUESTION # 76
An administrator is trying to apply configuration changes on Cisco CME. When the users registered on Cisco CME to dial a local number to a PSTN call, the Cisco CME sends an incorrect number of digits. What translation rule fixes the issue and sends the correct number of digits?
- A. voice translation-rule 1
rule 1 /^4...V /2404\0/ type any subscriber plan any isdn - B. voice translation-rule 1 rule 1 // // type any subscriber plan any isdn
- C. voice translation-rule 1 rule 1 /^4...S/ /9132404 0/ type any subscriber plan any Isdn
- D. voice translation-rule 1
rule 1 /^4...$/2404\0/ type any national plan any Isdn
Answer: A
NEW QUESTION # 77
Cisco UCM has 100,000 entries in the database learned through the ILS Service. Parameter ILS Max Number of Learned Objects in Database value is set to 100,000. What will happen to learned data when the service parameter value is reduced to 50,000?
- A. Cisco UCM does not write additional ILS learned objects to the database and keeps the existing database entries.
- B. Cisco UCM will overwrite an entry for newly learned data and keep the parameter value at 100,000.
- C. Cisco UCM does not write additional ILS learned objects to the database and will delete the first 50,000 entries learned to keep it to the service parameter value.
- D. Cisco UCM does not write additional ILS learned objects to the database and will delete the last 50,000 entries learned to keep it to the service parameter value.
Answer: A
NEW QUESTION # 78
Which two descriptions of the Standard Local Route Group deployment are true? (Choose two.)
- A. can be associated only under the route list
- B. chooses the route group that is configured under the device pool of the calling-party device
- C. can be assigned directly to the route pattern
- D. chooses the route group that is configured under the device pool of the called-party device
- E. can be associated under the route group
Answer: A,D
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION # 79
Which two configuration parameters are prerequisites to set Native Call Queuing on Cisco Unified Communications Manager? (Choose two.)
- A. A unicast music on hold audio source must be configured.
- B. Cisco IP Voice Media Streaming Service must be activated on at least one node in the cluster.
- C. The maximum number of callers allowed in queue must be 10.
- D. The phone button template must have the Queue Status Softkey configured.
- E. Cisco RIS data collector service must be running on the same server as the Cisco CallManager service.
Answer: B,E
NEW QUESTION # 80
Refer to the exhibit.
A user dials 84969010 and observes that the call is not routed immediately. The administrator notices that after matching the fixed-length translation pattern, the call hits the \+! pattern and waits for interdigit timeout What should be configured to ensure that the call routes out immediately?
- A. Do Not Wait For Interdigit Timeout On Subsequent Hops on the route pattern
- B. Route Next Hop By Calling Party Number on the translation pattern
- C. Do Not Wait For Interdigit Timeout On Subsequent Hops on the translation pattern
- D. Allow Device Override on the route pattern
Answer: C
NEW QUESTION # 81
If all patterns below are configured in Cisco Unified Communications Manager which would be used when dialing the pattern "123"?
- A. 12!
- B. 12X (urgent priority set)
- C. 12[2-5]
- D. 1XX (urgent Priority Set)
Answer: B
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION # 82
An engineer must route all SIP calls in the form of <user>@example.com to the SIP trunk gateway corporate local. Which two SIP route patterns can be used to accomplish this task? (Choose two.)
- A. [email protected]
- B. gateway.corporate.local
- C. example.com
- D. *@example.com
- E. *.*
Answer: D,E
NEW QUESTION # 83
Refer to the exhibit.
An administrator is troubleshooting a problem in which some outbound calls from an internal network to the Internet telephony service provider are not getting connected, but some others connect successfully. The firewall team found that some call attempts on port 5060 came from an unrecognized IP that has not been defined in the firewall rule. What should the administrator configure in the Cisco Unified Border Element to fix this issue?
- A. ip prefix-list to filter the unwanted IP address
- B. bind signaling and media to the loopback interface
- C. access list allowing the firewall IP
- D. use of port 5061 for SIP secure
Answer: B
NEW QUESTION # 84
For s SIP to SIP call flow, when does Cisco Unified Border Element require transcoding resources for DTMF?
- A. interworking between an OOB method and RFC2833 for flow-around calls
- B. interworking between h245-signal and rtp-nte
- C. interworking between an OOB method and RFC2833 for flow-through calls
- D. interworking between h245-alpha numeric and sip-kpml
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-border- element/200412-DTMF-Relay-and-Interworking-on-CUBE.html#anc35
NEW QUESTION # 85
The Cisco Unified Communications Manager Dialed Number Analyzer allows analysis of calls from which two devices? (Choose two.)
- A. CTI ports
- B. translation patterns
- C. device pools
- D. CTI route points
- E. IP phones
Answer: A,E
NEW QUESTION # 86
An engineer must configure a secure SIP trunk with a remote provider, with a specific requirement to use port
5065 for inbound and otubound traffic. Which two items must be configured to complete this configuration?
(Choose two.)
- A. Incoming Port in SIP Trunk Security Profile configuration
- B. Incoming Port in Security Information of the SIP Profile configuration.
- C. Destination Port in SIP Trunk Security Profile configuration
- D. Destination Port in SIP Information section of the SIP Trunk configuration
- E. Incoming Port in SIP Information section of the SIP Trunk configuration.
Answer: A,D
Explanation:
Section: Call Control and Dial Planning
NEW QUESTION # 87
Which two statements are correct with respect to the Client Matter Code setting in the route pattern configuration? (Choose two.)
- A. If you check the Allow Overlap Sending check box, you can also check the Require Client Matter Code check box.
- B. If you check the Allow Overlap Sending check box, the Require Client Matter Code check box becomes disabled.
- C. The Client Matter Code has the option to configure Authorization Level such as in the Forced Authorization Code.
- D. The Client Matter Code feature does not support overlap sending because the Cisco Unified CM cannot determine when to prompt the user for the code.
- E. The Client Matter Code feature does support overlap sending because the Cisco Unified Communications Manager can determine when to prompt the user for the code.
Answer: B,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmfeat/ CUCM_BK_F3AC1C0F_00_cucm-features-services-guide-100/CUCM_BK_F3AC1C0F_00_cucm-features- services-guide-100_chapter_010000.pdf
NEW QUESTION # 88
......
Maximum Grades By Making ready With 300-815 Dumps: https://buildazure.actualvce.com/Cisco/300-815-valid-vce-dumps.html