[Apr-2024] Juniper JN0-682 DUMPS WITH REAL EXAM QUESTIONS
2024 New ActualVCE JN0-682 PDF Recently Updated Questions
Juniper JN0-682 (Data Center, Professional (JNCIP-DC)) Exam is an advanced-level certification exam designed for experienced data center professionals who want to demonstrate their expertise in designing, configuring, and troubleshooting Juniper Networks data center solutions. JN0-682 exam is part of the Juniper Networks Certification Program (JNCP) and is intended for individuals who have already achieved the JNCIA-Junos and JNCIS-DC certifications.
Taking the Juniper JN0-682 certification exam is an excellent investment in your career as a data center professional. Earning this certification demonstrates your expertise and enhances your professional credibility. Having this certification on your resume will give you an advantage when applying for jobs and negotiating salary increases. So, if you want to validate your skills and establish yourself as a highly skilled data center professional, consider taking the Juniper JN0-682 exam.
NEW QUESTION # 72
Exhibit.
Referring to the exhibit, what happens when you initiate ZTP on a QFX5120 switch running Junos 21.3R1.9?
- A. ZTP performs the Junos installation but skips the configuration.
- B. ZTP skips the Junos installation but applies the configuration.
- C. ZTP skips both the Junos installation and the configuration.
- D. ZTP performs both the Junos installation and the configuration.
Answer: B
NEW QUESTION # 73
You are building a new IP fabric data center underlay network and want to ensure predicted load-balancing
behavior for traffic, traversing the fabric.
What are two approaches you should take to satisfy the requirement in this scenario? (Choose two.)
- A. Ensure that all uplinks are 40GbE.
- B. Ensure that every leaf node has an uplink spine node
- C. Ensure that every node has a link to every other leaf node
- D. Ensure that all spine devices are the same switched mode.
Answer: B,D
NEW QUESTION # 74
You are configuring a DCI VPN solution between sites that require an L3VPN to work with your EVPN deployment. Your organization's policy restricts configuring RSVP and LDP on your WAN links. While configuring the solution, you notice that no routes exist in the inet table.
In this scenario, which parameter will solve this problem?
- A. bgp family inet labeled-unicast per-group-label
- B. bgp family evpn signaling
- C. bgp family inet labeled-unicast aggregate-label
- D. bgp family inet labeled-unicast resolve-vpn
Answer: B
NEW QUESTION # 75
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Seamless EVPN VXLAN stitching is in use.
- B. Switch01 is a leaf device.
- C. Switch01 is a spine device.
- D. An OTT data center interconnect is in use.
Answer: A,B
NEW QUESTION # 76
You have successfully deployed an IP fabric in your data center. However, your server team complains that they are not seeing an increase in performance as expected. After examining the routing and forwarding tables, you notice that only a single route is listed to each destination in the forwarding table, even though there are multiple routes shown in the routing table.
In this scenario, what should you do to solve the problem?
- A. Disable the Spanning Tree Protocol that is blocking the redundant paths.
- B. Modify the hash algorithm so that only source and destination addresses are used.
- C. Write a load balancing policy and apply it to the routing table.
- D. Write a load balancing policy and apply it to the forwarding table.
Answer: D
NEW QUESTION # 77
What are two methods used to scale an IBGP IP Fabric? (Choose two.)
- A. Route reflection
- B. Spanning tree
- C. Redundant trunk groups
- D. Confederations
Answer: A,D
Explanation:
Explanation
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/bgp-confederations-for-scaling.html#id-u
NEW QUESTION # 78
You are troubleshooting a traditional Clos Layer 3 IP fabric in your data center. You are reviewing the BGP configuration for one of your spine devices.
Referring to the exhibit, which statement is correct?
- A. This spine device has three neighboring spine devices.
- B. This spine device has three neighboring leaf devices.
- C. This spine device will not install multiple next hops for remote destinations in its routing table.
- D. This spine device will not install any routes for remote destinations in its routing table.
Answer: B
NEW QUESTION # 79
Referring to the exhibit, not all routes are being exchanged by EBGP peers.
In this scenario, which BGP parameter would solve this problem?
- A. mulcipach
- B. mulcipach mulciple-as
- C. mulcihop
- D. as-override
Answer: D
NEW QUESTION # 80
When considering VRF routing-instances for network segmentation, which two statements are true? (Choose two.)
- A. A logical interface can participate in multiple VRFs.
- B. VRFs have independent routing tables.
- C. Multiple VRFs on a single device consolidate routing information to a single table.
- D. VRFs support overlapping subnets.
Answer: B,D
Explanation:
Virtual Routing and Forwarding (VRF) instances allow multiple virtual routing tables to exist on a single physical router. Each VRF has its own independent routing table, which allows network paths to be segmented without interference from other VRFs. This design supports overlapping IP address spaces, enabling the same IP subnet to be used in different VRFs without conflict.
Reference
Virtual Routing and Forwarding
NEW QUESTION # 81
You are troubleshooting a problem with traffic not reaching a remote VTEP. Referring to the exhibit, what is the reason for the problem?
- A. No VTEP is configured on peer 192.0.2.20.
- B. The remote VTEP does not have the correct VNI configured.
- C. The local VTEP is misconfigured with the wrong VNI.
- D. A conflict exists with the VLAN-to-VNI mapping.
Answer: B
NEW QUESTION # 82
Exhibit.
The configuration shown in the exhibit is intended to set up assisted replication but will not commit.
Which action will create a valid configuration in this situation?
- A. Change the replicator inet address to 192.168.100. 51.
- B. Change the 10.0 address to 192.168.100.1 primary.
- C. Delete replicator inet 192.168.100.1.
- D. Change the replicator inet address to 192.168.100.101.
Answer: D
NEW QUESTION # 83
You are an architect for an enterprise organization that currently operates three data centers with plans to expand to five data centers in the next year. You already notice large amounts of BUM flooding and must control this issue before implementing the next two data centers.
Which feature would address this issue?
- A. VXLAN BUM traffic filter
- B. mesh groups
- C. type-6 routes
- D. type-5 routes
Answer: A
NEW QUESTION # 84
You are deploying your data center switches using ZTP.
A brand new QFX5120 switch has been booted for the first time. It is failing to upgrade to the desired Junos OS version.
In this scenario, which two actions would you take to troubleshoot this problem? (Choose two.)
- A. From the configuration mode, issue the load factory-default and commit commands to re-initiate the ZTP request.
- B. Log in to the switch through the console and look for log messages that might indicate the cause of the issue.
- C. Ensure that anonymous login is enabled on the FTP server and that the FTP service is running.
- D. Ensure that the correct Juniper default FTP password is defined under the DHCP configuration option and restart the FTP service.
Answer: B,C
NEW QUESTION # 85
You are creating a new EVPN and are asked to selectively accept certain MAC advertisement routers from
your EVPN peers using VXLAN Encapsulation.
Which statements is correct in this scenario?
- A. You can use VRF policies and route distinguisher values to filter out unwanted routes.
- B. You can use firewall filters to filters out unwanted routes
- C. You can use MAC filtering to filter out unwanted routes.
- D. You can use VBRF import policies and community values to filter out unwanted routes.
Answer: D
NEW QUESTION # 86
You are asked to configure VXLAN for you c data center using multicast to exchange VTEP information?
In this scenario, which two configuration parameters must match on the VTEPs in the same VXLAN segment? (Choose two.)
- A. VLAN ID
- B. VNI
- C. Multicast group
- D. Routing instance name
Answer: B,C
Explanation:
C) Multicast group must match on the VTEPs in the same VXLAN segment to ensure that they can properly participate in the same broadcast domain. D. VNI (VXLAN Network Identifier) must also match to ensure that all VTEPs are part of the same VXLAN overlay network.
NEW QUESTION # 87
In the exhibit, VM1 is part of the same VXLAN segment as VM3.
Which type of message will VTEP B initially send to the RP so that VM3 can communicate with VM1?
- A. PIM register message
- B. IGMP Join (*, G)
- C. IGMP Join (S,G)
- D. PIM join
Answer: A
NEW QUESTION # 88
What is an advantage that EVPN has over VPLS when used for DC I?
- A. active/standby multihoming
- B. mass MAC withdrawal
- C. transparent BPDU transport
- D. reverse path forwarding
Answer: A
NEW QUESTION # 89
Which statement is true about the route shown in the exhibit?
- A. The VNI for this route is 304.
- B. The route is an EVPN type-1 route.
- C. The route target on this route is 1000
- D. The route uses a type-1 route distinguisher.
Answer: A
NEW QUESTION # 90
You are an architect for an enterprise organization that currently operates three data centers with plans to expand to five data centers in the next year. You already notice large amounts of BUM flooding and must control this issue before implementing the next two data centers.
Which feature would address this issue?
- A. VXLAN BUM traffic filter
- B. mesh groups
- C. type-5 routes
- D. type-6 routes
Answer: C
NEW QUESTION # 91
When considering VRF routing-instances for network segmentation, which two statements are true? (Choose two.)
- A. VRFs support overlapping subnets.
- B. VRFs have independent routing tables.
- C. Multiple VRFs on a single device consolidate routing information to a single table.
- D. A logical interface can participate in multiple VRFs.
Answer: C,D
NEW QUESTION # 92
......
Latest JN0-682 Pass Guaranteed Exam Dumps Certification Sample Questions: https://buildazure.actualvce.com/Juniper/JN0-682-valid-vce-dumps.html