You have the chance to enjoy our attentive service

In order to let you understand our products in detail, our TS: Visual Studio Tools for 2007 MS Office System (VTSO) test torrent has a free trail service for all customers. You can download the trail version of our 070-543 study torrent before you buy our products, you will develop a better understanding of our products by the trail version. In addition, the buying process of our 070-543 exam prep is very convenient and significant. You will receive the email from our company in 5 to 10 minutes after you pay successfully; you just need to click on the link and log in, then you can start to use our 070-543 study torrent for studying. Immediate download after pay successfully is a main virtue of our TS: Visual Studio Tools for 2007 MS Office System (VTSO) test torrent. At the same time, you will have the chance to enjoy the 24-hours online service if you purchase our products, so we can make sure that we will provide you with an attentive service.

Our TS: Visual Studio Tools for 2007 MS Office System (VTSO) test torrent was designed by a lot of experts in different area. You will never worry about the quality and pass rate of our study materials, it has been helped thousands of candidates pass their exam successful and helped them find a good job. If you choose our 070-543 study torrent, we can promise that you will not miss any focus about your exam.

DOWNLOAD DEMO

You can make good use of your fragmentation time to learn effectively

There are three different versions to meet customers' needs you can choose the version that is suitable for you to study. If you buy our TS: Visual Studio Tools for 2007 MS Office System (VTSO) test torrent, you will have the opportunity to make good use of your scattered time to learn whether you are at home, in the company, at school, or at a metro station. If you choose our 070-543 study torrent, you can make the most of your free time, without using up all your time preparing for your exam. We believe that using our 070-543 exam prep will help customers make good use of their fragmentation time to study and improve their efficiency of learning. It will be easier for you to pass your exam and get your certification in a short time.

We support the printing of page

As is known to us, internet will hurt their eyes to see the computer time to read long, the eyes will be tired, over time will be short-sighted. In order to help customers solve the problem, our TS: Visual Studio Tools for 2007 MS Office System (VTSO) test torrent support the printing of page. We will provide you with three different versions, the PDF version allow you to switch our 070-543 study torrent on paper. You just need to download the PDF version of our 070-543 exam prep, and then you will have the right to switch study materials on paper. We believe it will be more convenient for you to make notes. Our website is very secure and regular platform, you can be assured to download the version of our 070-543 study torrent.

Microsoft 070-543 Exam Syllabus Topics:

Microsoft TS: Visual Studio Tools for 2007 MS Office System (VTSO) Sample Questions:

1. You create an add-in for Microsoft Office Outlook by using Visual Studio Tools for the Microsoft Office System (VSTO). The add-in must set up a WindowSelectionChange event for the Outlook e-mail messages by using Microsoft Office Word as the editor.
You write the following lines of code. (Line numbers are included for reference only.)
01 Imports Word = Microsoft.Office.Interop.Word
02 Private Sub WindowSelectionChange ( ByVal Sel As _ Word.Selection )
03 Dim ins As Outlook.Inspector = Application.ActiveInspector
04 If ins.EditorType = Outlook.OlEditorType.olEditorWord Then
05 ...
06 AddHandler app.WindowSelectionChange , AddressOf _
Me.WindowSelectionChange 07 End If 08 End Sub
You need to bind the event to the Word application object.
Which code segment should you insert at line 05

A) Dim app As Word.Application = _ CType ( ins.CurrentItem , Word.Document ).Application
B) Dim app As Word.Application = _ CType ( ins.WordEditor , Word.Document ).Application
C) Dim app As Word.Application = _ CType ( ins.WordEditor , Word.Application )
D) Dim app As Word.Application = _ CType ( ins.CurrentItem , Word.Application )

2. You create a document-level solution for Microsoft Office Excel 2003 by using Visual
Studio Tools for the Microsoft Office System (VSTO). The solution creates a NamedRange control named XLNRange in an Excel worksheet. The range contains cells A1 through B3. You bind the XLNRange control to a data table named FactResellerSales by using the Data Source Configuration Wizard. You need to synchronize the FactResellerSales table with the changes that are made to the data in the XLNRange control. Which code segment should you use?

A) this.Validate (); this.factResellerSalesBindingSource.EndEdit (); this.factResellerSalesBindingSource.Insert ( 0, adventureWorksDWDataSet.FactResellerSales );
B) XLNRange.AutoFill ( this.Range ["A1", "B3"], Excel.XlAutoFillType.xlFillDefault );
C) this.Validate (); this.factResellerSalesBindingSource.EndEdit (); this.factResellerSalesTableAdapter.Update ( adventureWorksDWDataSet.FactResellerSales );
D) XLNRange.Merge ( this.Range ["A1", "B3"]);

3. You create a document-level solution for Microsoft Office Word 2003 by using Visual Studio Tools for the Microsoft Office System (VSTO). The actions pane of the solution document contains two user controls.
The user controls must be displayed in the following ways:
In a horizontal display, the controls must be placed next to each other.
In a vertical display, the controls must be placed one below the other.
You need to ensure that the solution meets the requirements.
Which code segment should you use?

A) Private Sub ActionsPane_OrientationChanged _ (ByVal sender As Object, ByVal e As EventArgs) If Me.ActionsPane.Orientation = Orientation.Horizontal Then Me.ActionsPane.Controls(1).Anchor = AnchorStyles.Left Me.ActionsPane.Controls(1).Anchor = AnchorStyles.Right Else Me.ActionsPane.Controls(1).Anchor = AnchorStyles.Top Me.ActionsPane.Controls(1).Anchor = AnchorStyles.Bottom End If End Sub
B) Private Sub ActionsPane_OrientationChanged _ (ByVal sender As Object, ByVal e As EventArgs) If Me.ActionsPane.Orientation = Orientation.Horizontal Then Me.ActionsPane.StackOrder = _ Microsoft.Office.Tools.StackStyle.FromLeft Else Me.ActionsPane.StackOrder = _ Microsoft.Office.Tools.StackStyle.FromTop End If End Sub
C) Private Sub ActionsPane_OrientationChanged _ (ByVal sender As Object, ByVal e As EventArgs) If Me.ActionsPane.Orientation = Orientation.Horizontal Then Me.ActionsPane.Dock = DockStyle.Left Else Me.ActionsPane.StackOrder = DockStyle.Top End If End Sub
D) Private Sub ActionsPane_OrientationChanged _ ( ByVal sender As Object, ByVal e As EventArgs) If Me.ActionsPane.Orientation = Orientation.Horizontal Then Me.ActionsPane.Controls(1).Dock = DockStyle.Left Me.ActionsPane.Controls(1).Dock = DockStyle.Right Else Me.ActionsPane.Controls(1).Dock = DockStyle.Top Me.ActionsPane.Controls(1).Dock = DockStyle.Bottom End If End Sub

4. You are creating an add-in for Microsoft Office Word by using Visual Studio Tools for the Microsoft Office System (VSTO).
You create the following objects in the add-in:
a DataSource object named ExpenseBindingSource
a TableAdaptor object named ExpenseTableAdapter
a DataSet object named ExpenseData
a CachedDataItem object named DI
The ExpenseData object contains a table named Expenses. The DI object contains a data island of the ExpenseData object.
You need to ensure that any changes in the content of the DI object are updated in the Expenses table.
Which code segment should you use?

A) Dim XMLR As XmlReader = _ XmlReader.Create("books.xml", settings) XMLR.ReadStartElement(DI.Schema) XMLR.ReadValueChunk(DI.Xml.ToCharArray(), 0, DI.Xml.Length) ExpenseData.ReadXmlSchema(XMLR.NamespaceURI) ExpenseData.ReadXml(XMLR.Value(0).ToString()) ... ExpenseBindingSource.EndEdit() ExpenseTableAdapter.Update(ExpenseData.Expense)
B) Dim XMLR As XmlReader = _ XmlReader.Create("books.xml", settings) XMLR.ReadStartElement(DI.Schema) XMLR.ReadValueChunk(DI.Xml.ToCharArray(), 0, DI.Xml.Length) ExpenseData.ReadXmlSchema(XMLR.NamespaceURI) ExpenseData.ReadXml(XMLR.Value(0).ToString()) ... ExpenseBindingSource.Add(ExpenseData) ExpenseTableAdapter.Update(ExpenseData.Expense)
C) Dim schemaReader As System.IO.StringReader = _ New System.IO.StringReader(DI.Schema) Dim xmlReader As System.IO.StringReader = _ New System.IO.StringReader(DI.Xml) ExpenseData.ReadXmlSchema(schemaReader) ExpenseData.ReadXml(xmlReader) ... ExpenseBindingSource.EndEdit() ExpenseTableAdapter.Update(ExpenseData.Expense)
D) Dim schemaReader As System.IO.StringReader = _ New System.IO.StringReader(DI.Schema) Dim xmlReader As System.IO.StringReader = _ New System.IO.StringReader(DI.Xml) ExpenseData.ReadXmlSchema(schemaReader) ExpenseData.ReadXml(xmlReader) ... ExpenseBindingSource.Add(ExpenseData) ExpenseTableAdapter.Update(ExpenseData.Expense)

5. You are creating a document-level solution for Microsoft Office Word 2003 by using Visual Studio Tools for the Microsoft Office System (VSTO). The customization contains a predefined schema to validate the data that users add. The path to the schema is stored in a variable named filename. The Unique Resource Identifier (URI) for the schema is stored in a variable named uri. The alias for the schema is stored in a variable named alias.
You need to ensure that the schema that the user selects is applied to the solution document. Which code segment should you use?

A) Me.Application.XMLNamespaces.Add (filename, uri , [alias], True)
B) Dim doc As ThisDocument = Globals.ThisDocument Me.Application.XMLNamespaces.Item(uri). _ AttachToDocument(doc)
C) Me.XMLSchemaReferences.Add ( uri , [alias], filename, True)
D) Me.XMLNodes.Add (filename, "", uri )

Solutions: